Peremes mérőcella PD 23
- Flange load cell in stainless steel for difficult ambient conditions, e.g. etching units and washing machines
- Multi-position, easy mounting due to various assembly options, e.g. flange bearings, pedestal bearings, inner or outer fastening
- Maximum operational reliability due to overload protection up to 20 times the nominal measuring force
- In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller
- Good temperature behavior and a high degree of linearity of the measuring elements due to the use of strain gauge application on a flat surface
TECHNICAL SPECIFICATIONS
| Accuracy class | 0.5 |
| Nominal characteristic (Sensitivity) | 1 m V/V |
| Combined error | < 0.5% |
| Characteristic value tolerance | 0.2% |
| Measuring principle | Full bridge strain gauge |
| Nominal resistance of the bridge strain gauge | 700 Ohm |
| Bridge supply voltage | |
| Nominal value | 10 V |
| Max. permissible value | 14 V |
| Mechanical stop | 1.8 to 2.4 FN dep. on type |
| Operating load | 1.8 to 2.4 FN |
| Limit load | 20xFN |
| Nominal measuring travel | 0.1 to 0.2 mm depending on type |
| Nominal temperature range | -10 °C to +60 °C |
| Operating temperature range | -10 °C to +90 °C |
| Temperature coefficient | |
| Characterstic value | ±0.3% / 10 K |
| Zero signal | ±0.3% / 10 K |
| Protection class | IP 65 |
| Max. permissible axial transverse force | 1xFN |
| Weight |
2,3 kg (d = 17 mm) 3,6 kg (d = 25 mm) 8,5 kg (d= 35 mm) |