Érzékelő henger PD 40
- Aluminum roller with fixed axis and 2 integrated load cells
- Assembly flange at one end for cantilever mounting •
- Maximum operational reliability due to overload protection up to 10 times the nominal measuring force
- Different roller diameters from 60 to 120 mm ensure maximum flexibility
- In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller
TECHNICAL SPECIFICATIONS
| Accuracy class | 1 |
| Nominal characteristic value (sensitivity) | 1m V/V |
| Combined error | < 1 % |
| Characteristic value tolerance | 0.2 % |
| Measuring principle | Full bridge strain gauge |
| Nominal resistance of the bridge strain gauge | 700 Ohm |
| Bridge supply voltage Nominal value Max. permissible value |
10 V 14 V |
| Output voltage Nominal range Max. range |
0 to 10 mV (with nominal force and a bridge supply voltage of 10 V) 0 to 18 mV (with 1.8 x nominal force and a bridge supply voltage of 10 V) |
| Mechanical stop Operating load Limit load |
1.2 to 1.8 FN dep. on type 1.2 to 1.8 FN 10 x FN |
| Nominal measuring travel | 0.15 to 0.25 mm depending on type |
| Nominal temperature range Operating temperature range |
-10 to +60 °C -10 bis +70 °C |
| Temperature coefficient of characteristic value of the zero signal |
±0.3 % / 10 K ±0.3 % / 10 K |
| Protection class | IP 50 |
| Max. permissible axial lateral force | 1 x FN |
| Connection cable | 6 x 0.14 mm2, 5/10 m long |