Érzékelő henger PD 30
- Aluminum roller with fixed axis and two integrated load cells
- For easy assembly between side walls. Optionally with securing kit or snug-fit shoulder screws
- Maximum operational reliability due to overload protection up to 10 times the nominal measuring force
- Different roller diameters from 80 to 200 mm ensure maximum flexibility
- The roller weight does not influence the measuring result, assuming a horizontal direction of measuring
TECHNICAL SPECIFICATIONS
Accuracy class | 0.5 |
Nominal characteristic value (sensitivity) | 1m V/V |
Combined error | < 0.5 % |
Characteristic value tolerance | 0.2 % |
Measuring principle | Full bridge strain gauge |
Nominal resistance of the bridge strain gauge | 700 Ohm |
Bridge supply voltage Nominal value Max. permissible value |
10 V 14 V |
Output voltage Nominal range Max. range |
'0 to 10 mV (with nominal force and a bridge supply voltage of 10 V) 0 to 18 mV (with 1.8 x nominal force and a bridge supply voltage of 10 V) |
Mechanical stop Operating load Limit load |
1.2 to 1.8 FN dep. on type 1.2 to 1.8 FN 10 x FN |
Nominal measuring travel | 0.15 to 0.25 mm depending on type |
Nominal temperature range Operating temperature range |
-10 to +60 °C '-10 bis +70 °C |
Temperature coefficient of characteristic value of the zero signal |
±0.3 % / 10 K ±0.3 % / 10 K |
Protection class | IP 54 |
Max. permissible axial lateral force | 1 x FN |
Connection cable | 6 x 0.14 mm2 , 5/10 m long |